Many people have been complaining about the common US Cellular error 111. Itโs one of the known errors being experienced by US Cellular subscribers in the United States.
US Cellular is a known brand because they offer brand new smartphones, giving users the opportunity to upgrade.
These phones function very well but there are times when it does not deliver as expected thus resulting in error 111.
As reported by some users, they often experience this error when sending a text message, hence, limiting them from sending messages to some designated contacts.
For more on what US Cellular error 111 is and how to rectify it, read on because that will form the basis of this write-up.
Table of Contents
Causes of US Cellular error 111
Error 111 is among the frequent errors you will likely experience as a user of US Cellular phones.
If you are currently facing this, then it needs to be resolved.
Issues about not receiving a text message on US Cellular can be linked to the messaging app, the device in use, or the US Cellular network.
At some point, one might fail to function correctly, and diagnosing it might be a bit difficult.
For instance, there may be a delay in delivering or receiving text messages because of traffic from the US Cellular network or malfunctioning of the message application.
How to fix US Cellular error 111
Restart your phone
This procedure helps to re-install the software and hardware component of your phone.
In addition, it will reestablish connection on the US Cellular network after the completion of the power cycle, hence correcting the error.
Inspect the device settings
Itโs important to note that data, SMS, calls, and MMS have a separate setting that keeps them regularly linked to a server.
To fix this, reset the text message setting, then restart your phone.
Check for service outage
Network outages are something that canโt be prevented.
When you experience this error message, there is every tendency for your phone not to establish a connection to the US Cellular network.
In other words, the server might be down.
To confirm this, you can inspect the signal bars seen at the top of your screen.
The lesser the number of these bars, the clear indication there is an interruption somewhere.
You can reach out to the customer help center for more information on the status of their service.
The message-blocking feature may be active
You may have mistakenly activated the message-blocking feature, thus restricting your message from going through.
Quickly check for this and deactivate it if itโs activated.
Perform firmware update
It is important to confirm if the firmware installed on your US Cellular phone is updated.
Navigate to your phoneโs settings, then proceed to the software settings to start downloading.
The installation of the firmware will happen afterward.
Most likely, this will resolve the error, then you can start receiving a text message as usual.
Do a device reset
After trying the recommended solutions above and there is no positive result, then you need to reset the phone back to factory settings.
The process will eradicate any bug causing the error on your phone.
The error will likely be rectified; hence you wonโt experience the issue again.
In Conclusion
Carefully following the recommended solutions above should have resolved the error message.
However, for some reason, if you are still faced with any problem, donโt hesitate to reach out to the customer help center of US Cellular for other solutions on how this error can be resolved.
Frequently asked questions
What is the implication of error 111 on a US Cellular phone?
The error will prevent your US Cellular phone from sending or even receiving messages.
A bug might be the cause of the app malfunction.
Why is my US Cellular phone refusing to send messages?
First, you need to confirm if you mistakenly added the contact to your block list.
Why do I experience error 111 on my phone?
Most cell phone users encounter this error when trying to send a text message using their cell phones.
Ensure the carrier you are using supports MMS or SMS messaging.
Also, check if the signal bars are present.
ย