In the hectic world of today, most people turn to television for entertainment. With the advent of cable television, DVRs, and the like, there is no need to buy a movie or a TV show when you want to watch it.
You can just pause it and then go back to it after you have finished your work. To enjoy this convenience, you need a good remote control.
Today we will cover the question of how To Program Time Warner Remote To Vizio TV.
The problem with most remotes is that they lack that user-friendly aspect. They are too complicated and you don’t know what buttons do what.
The other problem is that they aren’t as useful as you might want them to be. You have to mess around with the remote if you want to watch TV.
This is the reason why you should consider programming your Time Warner remote control to work with the Vizio TV. It’s an easy process that will eliminate the need for two or more remotes, which are often confusing and cumbersome.
Table of Contents
How to program Time Warner Remote to Vizio TV?
Usually, the Time Warner remote has an instruction manual with everything you need to know when it comes to programming it to your TV and other devices.
However, if you have lost the manual, then you can still use this guide as it will take you through every step in detail.
Before you start, make sure you know the model number of the remote. It’s typically found under the battery cover.
Also, there are various methods of programming a remote to your TV. We will cover each of the methods comprehensively.
Programming Time Warner remote to Vizio TV with codes
This method involves entering a code on the remote. This is how you go about it;
- Locate the five-digit code that works with this particular brand of TV. The programming codes for Vizio TVs include 10864, 11756, 11758, and 10885. Any one of these should work.
- On the remote, press the key that’s labeled TV, only once.
- Next, press and hold down the SETUP key until it flashes twice.
- After that, you have to enter a 5-digit code designed to program a Vizio TV. Once you’ve done this, the LED light will flicker at least two times.
- In case the light blinks more than just twice, you will have to start the procedure from the beginning and reenter the code once more.
- When the process is complete, point the programmed remote to your television and press the POWER key once. The TV is supposed to switch off and if not, repeat the above steps.
The Auto-Search Method
As the name suggests, this method relies on the auto search feature of your TV to find the remote’s code.
- Switch on the Vizio TV set.
- Now move on to the Time Warner remote. This step involves pressing the TV button as well as the OK/SEL buttons simultaneously for about 5 seconds. The TV LED will turn on for about 30 seconds.
- While aiming the remote at the Vizio TV, press CH or CH- buttons until the TV turns off. After that, the remote will show some code signals.
- Once done, press the POWER button on the remote to see if you entered the correct code. If the remote and TV are paired, the TV will switch back on. You can also test other controls like the volume and mute. In case the controls don’t work, repeat the steps once more.
- Now lock the code by pressing the TV button. The LED light should blink twice to indicate everything is working fine.
Quick Setup Method
This method involves only a few steps;
- Turn on the Vizio TV set.
- Find the remote manual and look into Quick Setup Codes. Depending on the brand of your TV, you have to press TV followed by the Blue or Yellow buttons. This should result in the TV LED turning on and remaining solid for about 30 seconds.
- With the LED light on, aim the Timer Warner remote at your Vizio TV and proceed to enter the one-digit code for your TV brand. You can look for it in the remote manual. Once you have done that, the TV will go off. If it doesn’t, enter the same digit over and over again until it responds.
- After the TV turns off, press the TV button to save the code.
Conclusion
As you might have noticed, programming a Time Warner remote to work with your Vizio TV is quite a direct process. In addition, it comes with some benefits like not having to use different remote controls for each device. So, go ahead and get started with programming your remote.
FAQs
What is the Vizio TV code for Time Warner/Spectrum?
The codes that work with Vizio TV include 11758, 11756, 10864, and 10885.
How do I get my remote to work on my TV?
You can get your remote to work on your TV using the complete guide above.
Can I use any remote for my Vizio Smart TV?
Yes, but you will need to program the remote first.
