Mediacom is one of the biggest providers of cable TV in the US. Besides the Mediacom Cable Box, the customers are also issued with a universal remote control.
The remote control may be programmed to operate several home devices besides the Mediacom Cable Box.
The remote comes programmed to operate the Cable Box but you might use special codes to program this universal remote to operate other devices such as your TV, DVD player, and several others.
This brief will explain to you how to program Mediacom remote control using Mediacom remote control codes.
Before we explain to you how to program the DRC800 remote and the Atlas DVR/Atlas OCAP remote, we must make sure you are versant with all the Mediacom remote codes.
The Mediacom universal remote uses 4-digit and 5-digit programming codes to program the remote control. The following codes can be used to program the Mediacom universal remote.
Table of Contents
What is Mediacom Universal remote?
The Mediacom universal remote with control is the ultimate control device. The award-winning control technology will transform your smartphone into a powerful handheld remote that can easily give you total control over your television and other home devices, including Blu-ray Disc players, cable boxes, audio receivers, and more!
All in a neat little package that fits perfectly in your hand and can be programmed to work with up to four different devices.
Programming the Mediacom Universal Remote
Before you can program your universal remote control to work with your devices you need to know the programming codes. These codes are listed here to help you program this remote depending on the device you want to control.
You can also search for the code using Google or another search engine by searching for โMediacom remote codesโ and then the model of your device and โprogramming code.โ
Once you have found your code(s) follow these steps;
- Turn on a device (example: TV, VCR, DVD, etc.) you wish to program.
- Press and hold the CBL button at the top of your remote until all mode buttons light up, then release.
- Press and hold down both the CBL button and OK/SEL button at the same time until all mode buttons light up again, then release both buttons.
- Press 9 โ 9 โ 1 (the TV button will blink twice).
- Enter the first five-digit code for your device. If done correctly, the TV button will blink and the device will power off. Here are some of the codes that you should familiarize yourself with.
4-digits Mediacom remote codes
- 1877
- 1376
- 3560
- 0476
- 1284
- 1982
- 1584.
5-digits Mediacom Remote codes
- 51376
- 42815
- 51877
- 53560
- 51982
- 45818.
DRC800 Remote programming
Now that you know all the Mediacom 4-digit and 5-digit codes, letโs start by understanding how to program Mediacom DRC800 Remote. Here are the steps to take;
- Switch on your TV or any other device you want to control with this remote
- Take your remote and press the Mode Key for a few seconds. You will notice that the mode ket light will start to glow, after this, you can release the button.
- Press the Power Button of the remote and the Mode key light will turn off
- Now place the remote in front of the device while you are pressing the channel up button. The device will eventually switch off. This shows that your device has been programmed to work with the device.
- Press Okay to save the code.
How to program Atlas DVR/Atlas OCAP remote?
Here are the instructions on how to program Atlas DVR/Atlas OCAP remote;
- Turn on the Devie that you want to operate with this remote
- Click the Mode Key on your remote for about 5 seconds until the mode key blinks once.
- Press the Setup Key and the mode key will blink twice.
- Type 991 on your remote and give it time until the mode key light blinks twice
- Now place the remote in front of the device
- Youโre now expected to keep pressing the channel up button until the device goes off. This is an indication that your device has now been programmed using Mediacom Remote codes.
Can I program Mediacom Universal remote to control more than one device?
Setting up a universal remote control is a great way to save time and energy when it comes to managing the electronics in your home. A universal remote can control TV, cable or satellite box, DVR, Blu-ray player, soundbar, game console, and media player
To program a MediaCom universal remote control, gather the correct codes for each device you wish to program. Next, turn on the device you wish to program. Then hold down the โSetupโ button until the LED light turns on.
Enter the first code for your device found in the list provided with your universal remote. At this point, you have three options: press โPowerโ to test your setup; press โCh+โ to advance through other codes to find one that works, or press โSetupโ again if none of the codes work.
If you are programming more than one component, repeat steps two and three until all devices are programmed. If you canโt find a working code, use online resources to contact help.
How do I program my Mediacom remote to control my TV?
You can program your Mediacom remote to control your TV or other audio/video devices. You will find below the steps to Program your Mediacom Remote Control simply and easily.
Procedure to Program your Remote Control;
- Turn on the device you wish to control
- Press and hold the CODE SEARCH button until the indicator light lights, then release.
- Press and release the desired Mode button (TV, VCR, etc.). The indicator light will blink once and then remain lit.
- Enter the first four-digit code for your brand. If correct, the indicator light will blink off after the last digit is entered, then will blink on again. If you have entered an invalid code, the indicator light blinks rapidly for approximately two seconds and remains lit.
- Test each of the operational buttons on your remote control to verify that they are functioning correctly with your specific device. If any of the buttons do not work correctly, repeat steps 1-4 above using the next code listed for your brand (or try all of the codes if listed multiple times).
My Universal Mediacom remote wonโt pair
Your remote should pair automatically. Do you see the โpairedโ light on the remote when you remove the battery cover? If not, you need to get a new remote.
The other option is that your TV doesnโt use RF remotes and you need to use an IR adapter. You can get one from Tivo or Amazon. It plugs into the coax input on your TV and provides IR signals from whatever RF remotes it sees.
Mediacom Universal remote not working: Ways to fix it
Have you ever tried out a new remote and had it not work? Itโs frustrating. Thankfully, there are a few ways to fix a universal remote that isnโt working correctly.
Donโt put up with a non-working remote just because youโre out of warranty or you donโt know how to fix it. Check out our tips below to make your universal remote start working again!
Itโs simple: when your remote stops working โ donโt panic! First, check the battery. If the battery is low, replace it with a new one of the same size and type (AA). Then reset your remote to Factory default settings by pressing and holding both the MUTE & DIMMER buttons until you see a flash of white light.
The red LED light should be on. To check if your remote is functioning, press any button and see if it works from there. You can do this with both remotes.
FAQs
Mediacom Universal remote is not working?
If your remote stops working, check the battery first! If itโs low then replace it. We recommend using a new AA battery. Now press and hold hotkeys on both remotes until you see a flash of white light come out of one end: MUTE & DIMMER for each remote.
What are common Mediacom remote codes?
If you want to know some of the Mediacom codes, check these 51376, 42815, 1284, 1982, 1584, and 45818. There are a few others that you should check depending on the device you want to program.
How to Fix the Mediacom remote not working?
There are several ways to fix the Mediacom remote not working. One of them is to reset the remote. You can as well consider restarting your device whether the TV, DVR, or Mediacom set Box. If none of these works, then consider contacting Mediacom.
Conclusion
Do you have to deal with a finicky remote control? Using the code listed above will allow you to access all of the programming options in your remoteโs menus. Hopefully, youโll be able to simplify your television watching and movie-watching experiences, from now on.
ย