Skip to content 
Resetting your TiVo remote control is a necessary procedure especially if there are issues.
Your TiVo remote holds so much power because itโs only the specific remote control that works with your TiVo box. That means you canโt possibly do anything unless itโs working properly.
If you notice that your TiVo box is not quite responding to the remote control, this might be the right time to reset it. Normally, the reset procedure will remove all key functions as well as clear TV and A/V codes and programmable buttons. In other words, the TiVo remote will be wiped clean and remain as good as new.
But before we can dive into the details, letโs discuss some of the reasons your TiVo remote might fail to work. Usually, when the remote is not working, resetting it is the last course of action.
Resetting removes the remote control address and thus, allows it to control any of the TiVo devices. There might be other simple reasons why your TiVo remote is not working and fixing such minor issues is easy.
Itโs important to try some solutions before resorting to resetting.
Table of Contents
Why is my TiVo remote not working?
Issues may arise while using your TiVo remote control. Nothing seems to work and you canโt use the remote to control your devices.
The first thing is to identify where the problem is coming from and proceed to find a viable solution. Here is what to do when your TiVo remote doesnโt work.
Check the batteries
This is the very first thing to do when you notice the TiVo remote isnโt working at all. It could be that the batteries are bad and need to be changed or they are incorrectly positioned.
Press any button on the remote to see if the amber light flashes. If it doesnโt light up, replace the old batteries with a new set or position them correctly and try again.
In most cases, the batteries are worn out and require a replacement. As such, this is an easy fix that will get your TiVo remote working once again.
Restart your TiVo box
Sometimes, there is an issue with the TiVo box that prevents it from responding to the remote control. To confirm this, press any button on your remote.
If the amber light flashes but the lights on the front of the TiVo box donโt respond, the problem is likely originating from the device.
The simple solution would be to restart the device and get things moving. Unplug your TiVo box from the power source and wait for a few minutes. Afterward, plug it back in and test the remote.
Check for obstructions
Many times we forget that there could be obstructions blocking the remote control signal. You should take the time to check for any obstructions.
Perhaps the door of your entertainment unit is blocking the signal. If thatโs the case, remove the obstructions and the remote might start working soon after.
Locate remote controls for other devices
It could be that there is another remote control in the room sending an IR signal. This might prevent the TiVo remote from working correctly.
Locate all the remote controls for other devices and ensure there isnโt one interfering with the TiVo remote control signal.
Common devices with remotes prone to causing interferences include stereo, DVD, TV and wireless game controllers.
Ensure the remote is set up for the device
If you have several TiVo devices in the house, itโs easy to get the remote controls all mixed up. The remote you are using may not be set up for the particular device.
Thatโs why itโs not working. What you should do is try all of them just to confirm youโre using the correct remote.
If nothing works, then the next thing to do would be to reset the remote control and fix any existing issues one and for all.
How to reset the TiVo remote control?
Usually, resetting the TiVo remote control eliminates any issues. The reset process removes the remote control address, the programmed functions, TV codes, and so on.
On that note, letโs cover the steps required to reset a TiVo remote control.
- Using your hand, cover the end of the TiVo remote or point it away from the TV off (this prevents inadvertent pairing).
- Next, press the TiVo button and the TV power button concurrently until you can see the red light showing. If you are using the Glo, Premiere, and Slide remotes, the light is yellow.
- Press Thumbs Down three times and then Enter. The red light on the remote is supposed to go out. If it doesnโt, then youโll have to repeat this step. Also, if you accidentally press the wrong button, press Clear to start over the entire process.
- Remove your hand from the end of the remote.
- For the TiVo slide remotes, pair them to the USB receiver.
- Since the reset wiped out everything, itโs now time to reprogram the TiVo remote.
FAQs
Why is my TiVo remote not working?
There are many reasons why your TiVo remote is not working. For starters, check the batteries and ensure they are inserted properly.
Secondly, press any button on the remote to see if the red light flashes. If it does, the issue might be your TiVo device not responding to the remote.
How do I reset my remote control?
We have provided all the information you need in this article. You can follow the steps to reset your TiVo remote control.
How do I fix my TiVo remote control?
There plenty of ways to fix your TiVo remote control. Make sure the batteries are good and positioned well. Another thing would be to reset it and clear any errors.
Conclusion
While itโs not always the best idea to reset your TiVo remote control, itโs sometimes necessary. As long as you use the right steps, everything will go smoothly. Use the steps in the article to reset your TiVo remote at any time.
ย
