For users asking why their DirecTV remote volume not working rc73, this write-up is for you. Are you currently experiencing setbacks because your DirecTV remote volume is malfunctioning? It’s a problem similar to other users.
Other users have also complained of this frustrating occurrence and figuring out the fault can be a herculean task. Not to worry, it can be resolved. Hence, in this write-up, we will be outlining ways to troubleshoot and rectify this error. Aside from that, we will endeavor to answer other most reoccurring questions related to this issue.
Table of Contents
How to fix it?
1. Inspect the batteries
As confirmed by some users, one of the reoccurring causes of this problem is weak or dead batteries. Hence, before proceeding to any other solution, it is advisable to replace the batteries if you have any spare. Simply, open the compartment that houses the battery, take out the corroded one, and replace it with the new battery.
2. Scrutinize the Remote Sensor
When you have confirmed that the issue is not from the batteries, next is to inspect the remote sensors which are responsible for receiving signals and transmitting them to the DirecTV receiver.
If the remote sensor malfunctions, then it will be difficult for the rc73 remote to disperse the signal to the receiver, hence the volume will also be affected. To inspect the sensor, point the remote control directly at the receiver and tap on any button.
Once the LED light displays a green color, then the sensor functions correctly. Contrary to this, the sensor needs to be replaced.
3. Check the TV Volume
The TV volume might be another reason why you are having an issue with the rc73 remote. Sometimes the TV volume will be turned down, hence affecting the volume. You should use the TV remote and readjust the volume to a good level.
4. Examine the DirectTV Receiver
When you have confirmed that the volume is not the issue, next is to check your DirecTV receiver. Once there is an issue with the receiver, the volume will be affected. To scrutinize the receiver, disconnect it from the power outlet and be patient for a few minutes. Then reconnect it and confirm if the volume has been corrected.
5. Repair the rc73 remote control
If none worked, it’s time to re-pairing the remote control. To actualize this, tap and hold the Select and Mute buttons pending when the LED light on the receiver displays twice. Next is to tap on the 9-8-1 button in sequence. This should do the pairing to the receiver.
Conclusion
Sometimes troubleshooting and rectifying the DirecTV remote volume can be a herculean task but it’s still possible. Ensure to constantly check the batteries, the remote should be synced very well, and set aside any form of interference from nearby devices.
In a situation when none worked, purchase a replacement. Confidently, this write-up has given you the needed information on how to get your DirecTV remote volume rc73 fixed.
FAQ
What does DirecTV RC73 remote signify?
This is a universal remote that is constructed to control other DirecTV devices. In other words, it’s a multipurpose remote control that can effectively control your receiver, television, DVD player, etc.
What could trigger the DirecTV RC73 remote volume to stop functioning?
Whenever this happens, some suspicious causes are as follows; the battery might have become weak and needs to be replaced, and the remote control must have been wrongly synced with the DirecTV or wrongly programmed to control the volume. Interferences from nearby devices can also be a factor. Finally, remotes sometimes malfunction on their own.
Is there a way to confirm if DirecTV RC73 remote is properly synced?
This can be done by pressing the ‘Info’ button. Any properly synced remote will always display the DirecTV box with detailed information about the current program or channel being watched.
What is the procedure to sync DirecTV RC73 remote control?
It’s an easy process. Before you start, ensure that the remote is in RF Mode. This can be done by pressing the Mode button until its LED light displays a red color. Next press and hold the Select and Mute button until the LED light displays green. Lastly, tap on the power button. Now, your remote has been properly synced with the DirecTV box.
What can I do when the RC73 volume stops working?
After trying the steps outlined in this write-up and you still experience this error, it’s advisable to purchase another remote control. A replacement is always available at the DirectTV outlets or from any other third-party sellers nearby.