Since its establishment, Optimum has been consistent in the provision of one of the best TV services in the United States.
Their services are not only phenomenal because of coverage and speed, they offer other technological features better than their competitors.
Optimum aims to ensure all homes in the US receive the best equipment. For instance, the majority of other TV service providers make use of entry-level cable remotes and boxes while Optimum has already introduced a unique home entertainment tech that will enhance your experience.
Also with subscribing to Optimum Altice, you have the opportunity of enjoying premium smart TV features in addition to a smart remote that can be paired wirelessly.
There is an in-built Bluetooth for reliable connectivity and you don’t necessarily need to point the smart remote to the Altice box direction for it to function.
In short, the box can be kept out of the reach of pets, dust, and children in a closet. With a smart remote, you can enjoy voice accessibility i.e., using your voice to control the box.
Table of Contents
Optimum Altice Remote Blinking
Constant blinking of light is one of the frequent issues you’ll observe while using the Altice smart remote.
Continuous occurrence of this issue results in a delayed response of the smart remote. In most cases, the remote will outrightly stop responding.
It’s important to find out what triggers the blinking status light.
The following are what to check and how to get it fixed;
1. Bluetooth
Unlike infrared remotes, the Altice smart remote makes use of Bluetooth to transmit its signals. This is what makes the aim-anywhere and voice command possible.
To get your voice command activated in other to start navigating through the channels and TV menus, the remote must be programmed to work with the Altice TV box via Bluetooth.
As you commence pairing, light blinking indicates that the remote is ready to be paired. Your smart remote will now start scanning for a nearby device to pair with.
2. Battery replacement
Most times, low batteries can cause the remote to start blinking. You’ll get to know this because the light will continue to blink at a specific interval.
For those making use of normal batteries, you need to replace them. The same applies to rechargeable batteries.
You need to get the batteries charged before putting them back inside the remote.
After doing this, there is every possibility that the lights will not disappear immediately, hence you’ll need to reprogram the remote to function with the box accordingly.
3. Restarting of Altice box
Bluetooth, as we all know is a great wireless technology that can be used in so many applications but the disadvantage is that it comes with some flaws.
Most times, it may lead you to restart your Altice box because the signal receiver will be affected and any input undetected.
This can lead to the light on your remote constantly blink and you won’t be able to figure out why. To resolve this, you can try to power cycle the Altice box.
To do this follow the guidelines below;
- First, you need to remove the power cord from the Altice box
- Allow you to stay for few seconds before plugging it back in.
When this is done, all connected Bluetooth devices will be disconnected. Then your remote will be connected immediately after some seconds. The light should’ve disappeared.
4. Reprogram/Repair your remote
If you recently installed new batteries and have rebooted the box yet the light is still there you will need to reprogram the remote with the TV box.
- The settings screen of the Altice box can be accessed by pressing the home button on the remote
- Select preference, then select a remote to Altice One
- Follow the on-screen guide from the TV >>> ‘Pair Remote Control’.
- Don’t forget to free and hold the 7 and 9 buttons for few seconds.
After the remote pairing, you’ll receive a notification ‘Pairing Complete’ on your screen. Then the light blinking would’ve stopped. You can start using your remote again.
5. Reset the box
At this point, if none of the suggestions above have worked for you, perform a factory reset on the box.
This is to return it to the original settings. Because your remote is not responding, you need to manually access the Altice box.
Follow the steps below;
- Locate the reset button behind the box.
- Press and hold the button for at least 10-15 seconds pending when the light fades away and the box reboots. The TV service will return in few minutes. However, it’s important to note that this process will erase everything already saved inside the box.
Locate the nearest Optimum Store
If after resetting the box and it didn’t work, your final option is to visit the nearest Optimum store.
There a professional technician will be able to check the box to ascertain the actual problem. If it’s what can’t be repaired, you’ll be given a new remote or box.
Note: It’s advisable to use a remote from Optimum. This is because third-party remote may cause technical errors.
In Conclusion
If you’re currently faced with this problem, carefully apply all the recommended troubleshooting hacks outlined in this write-up, one will most likely work for you.
Frequently Asked Questions
What is stopping my optimum remote from working?
If you notice this error, reboot or reset the Altice box. To successfully reset it, press and hold the button behind the box for few seconds. When reset is complete, pair the remote with your box again. This should rectify it.
What could be the cause why optimum router blinking?
If your optimum router is blinking, start by resetting the router. After restarting, connect the device again. Once you establish a connection, the blinking will stop.
What does Optimum Light blinking actually mean?
The implication is that it will make the remote unresponsive, so you need to restart it. This remains one of the basic troubleshooting to rectify this error.
Secondly, examine all connectors or cables. Lastly, Reach out to Optimum for further assistance.