If you’re asking about the Xfinity router flashing blue light then read on how to solve this issue.
Chances are if you have cable internet, it’s provided via a modem/router combo device supplied to you by your service provider.
There are many types of devices that work as modem/router combinations.
Some of them also include additional features such as supporting and connecting multiple devices, accessing the Internet while on a Wi-Fi network, or even having built-in Wi-Fi.
Imagine coming home and seeing the flashing blue light on your cable modem router.
You might wonder if it’s broken, if there is some attack, or if you did something wrong.
That’s understandable.
So in this article, I’ll explain what the flashing blue light means and how to fix it.
When your modem has a blue light flashing, it usually indicates an issue with your router’s connection.
If you’re getting this error message, all is not lost.
The Xfinity Wi-Fi router is a combination modem and Wi-Fi router offered by Xfinity.
If you’re experiencing a flashing blue light on your Xfinity Wi-Fi router, don’t worry.
This flashing blue light indicates that the modem is trying to communicate with the Internet.
The easiest way to figure out why this flashing blue light is occurring is by connecting your laptop or phone to an Ethernet cable.
Table of Contents
What Does the Flashing Blue Light Mean?
As with any technology piece, there are issues to be dealt with.
One of the biggest problems that Comcast Xfinity users often come across is the flashing blue light on their Xfinity router.
What does this mean?
The flashing blue light means that it is in the process of WPS pairing.
In other words, the flashing blue light means that the router is seeking to establish a strong connection with a wireless device.
You can also see this behavior when you press the reset button on the router.
However, in that case, the behavior is not permanent.
You can stop it by removing the power cable and reinserting it into the Xfinity router.
If you want to know how to factory reset your Xfinity router, then keep reading this article.
In this article, we’ll discuss two ways you can factory reset your Xfinity router.
If the light is persistent, then it simply means that the router cannot establish a stable connection.
Here are other potential reasons:
- The router/modem is out of order
- Service outage on the Providers end
- Faulty part interrupting the connection
- Loose wiring in the setup
Besides these issues, several other factors can contribute to this issue.
Before you start calling customer care, here are some DIY solutions that you can try today.
Reset the Router
The first troubleshooting method is to try resetting the router.
This doesn’t require any deep technical knowledge.
Whenever an electronic device misbehaves, the first tactic is to reset the gadget.
Resetting the device returns it to its original state.
But before we attempt to reset the router, you should be sure that the loose connection does not cause the issue.
You have to check the interface cables and the power plug.
Make sure that all the cable, in this case, is firmly connected.
There are certain cases where the trouble is about the loose contacts.
If you must reset the router, follow the steps below:
- Switch the router off and unplug the power cable
- Remove all the other cables and wait for 5 minutes
- Put the power cable back and turn the router on
- Initiate the WPS mode and the router should be able to establish a secure connection
It’s important to note that you are not resetting the router to the default settings.
You are just trying to give it time and see if the router will work.
Soft Reset
You are probably familiar with troubleshooting other devices, including smartphones and laptops.
You never knew that this process can work with the majority of other electronic devices.
The soft restart refers to restarting the device after it has deleted all the unsaved data and cache memory.
Soft reset works the same way as a restart process.
The only difference is that you will have to hold down the Power Button for 10 seconds while the router is shutting down for about 10 seconds and then release the button.
Before the router has restarted, it will drain the residual power in the system and reset.
The soft reset is very different from a Hard reset because it doesn’t wipe out the customized settings in the router, such as the passwords and the username.
After the process, it will restore the router and the data.
Replace the Splitter
You probably use a Splitter to connect to the Cable box and an Xfinity router.
If this is the case, then the problem might be coming from the Splitter, and the most effective solution is to replace this cable.
Splitters are not very expensive, and replacing this can solve the whole problem.
Restart the WPS mode
Restarting the WPS mode in a router initiates the paring process, and it can help resolve the issue with your router.
Look for the WPS button on the Xfinity router and press it down until it restarts.
If you have an older router model, the Button is in the front panel.
FAQs
Why is my Xfinity router flashing blue light?
Your Xfinity router is probably flashing blue because it’s trying to establish a connection.
It can also flash blue light if it has failed to establish a secure connection.
Router Flashing Blue: How do I solve the issue?
There are several possible solutions to this issue.
If you want to solve the issue, try disconnecting the Xfinity router from the modem and repeating the process again.
Reset the router or Perform a soft reset.
What lights should be flashing on my router?
There are two main LED Indicators on your router.
The green light is for the power, and the quivering blue light is for the WPOS mode.
These two lights should be stable.
If it’s not steady, then there might be issues with the router.
Conclusion
Now you know what the blue light on your Xfinity router means and what you should do.
However, if the problem persists, try to contact the local support or Xfinity Customer support.
The support might help you resolve the problem with ease.
