For those complaining about DirecTV remote slow to respond, read on to find out how to fix this error. Individuals who are keen on their home entertainment know that there is no better choice than DirecTV.
For starters, they’ve got the highest rating when it comes to communications, programming, functionality, promotions, and interesting features. Furthermore, their package is affordable to numerous potential subscribers.
You’ll get to enjoy quality channels. In addition to that, you’ll get to enjoy a handy feature that permits you to record 200 hours of TV to enjoy at a later date.
However, just like any other device, something must go wrong. One such frustrating error is that you might notice that your DirecTV remote delays before it responds. The good news is that it can be fixed by following some troubleshooting guidelines.
Table of Contents
How to fix it
If you’re lucky, one of the recommendations outlined below will be able to fix this error. Let’s go straight into how this problem can be fixed.
Examine the batteries
This is one of the first things you should check. When your battery is low, it will affect the device they’re powering. Normally, the device will stop performing its full function. You just need to get rid of the old batteries and insert new ones. Most times this simple task can resolve the issue. Check the other solution if it doesn’t.
Reset the Receiver
If changing the battery still did not work, it’s time to get into the main tech-based approaches. But you don’t need to be tech-savvy before you can do it. The essence of this step is to make sure the receiver is okay. What it entails is just a restart. If it works, that will be great. If it doesn’t, try the next.
To reset:
- Press the red button on the receiver.
- The reset will last for about 10 mins until it’s completed.
- This reset process will put everything and the remote will function optimally. Try the next option:
Remote Control Programming
Most users only make use of the DirecTV remote control just for the receiver and not their TV. If this is you, then you need to give remote programming a trial. You might be thinking it’s complicated but it’s easy and most times it helps enhance the remote and eradicate any other performance issues.
- First, press the “Menu”.
- Navigate to “Settings” >>>> “Help.”
- Next, choose “Settings” >>>> “Remote Control” option.
- In this section, click on the “Program Remote” option.
- That’s all. You can now continue flicking and enjoying any of your favorite shows.
Remote reset
If you’ve tried the tips mentioned above and yet no positive response, then it’s time to reset your remote control. The process of resetting is not difficult. You just need to follow the steps below to get it done:
- First, hold the “Select” & “Mute” buttons down simultaneously.
- You’ll notice a flashing light. This is an indication that the remote is now ready to be reset.
- Next up, press 1, followed by 8, and finally 9.
- After this, tap the “Select” button seen on your remote.
- You’ll see the remote control light flash four times.
- At this point, you then know that the remote resetting is now complete.
- The remote should start functioning optimally without being slow.
In Conclusion
The tips listed above are the tricks you need to resolve the slow response of your DirecTV remote. When you’ve taken your time and tried all the suggested methods above and you still notice that your DirecTV remote is yet to respond like before, then it’s obvious you’ve got a faulty remote and it needs to be replaced.
Sometimes DirecTV might charge you to replace faulty equipment but, in a situation, where it is bad, the swap will be done without any charges. But this will depend on the service plan you’re currently subscribed to. There is no harm in trying. The truth is that your remote to be changed to a new one.
Frequently asked questions
Why does my TV remote delay responding?
Whenever you notice this error, the best approach to solve it is; remove the cable box for at least 5 minutes. This will help reset the box and also help eradicate whatever that is delaying the remote from responding. Another factor to consider is the batteries. Once they’re low, it needs to be changed or else it will cause the box to respond slowly.
What’s the possible way to reset DirecTV remote control?
This can be done by resetting the remote to its default factory settings:
- First, press and hold SELECT and MUTE simultaneously until you see the remote light flash three times.
- Press 1, 8, 9, then SELECT. This will cause the remote to flash four times. Then it resetting is over.
What could be the cause why my remote is not working?
When a remote-control refuse to respond or control your television, it might mean that the battery is low. Also, ensure your remote is being pointed in the direction of the receiver or television. Apart from these, something such as lighting, electronics, etc., might be blocking the television remote sensor. Hence, you need to look around and remove items likely to be interfering with the remote.
My remote can’t just change channels?
Once your battery is low or dead or plugged in the wrong way, it will be difficult to function optimally. In this situation, you need to check the direction of the batteries. Also, you can decide to install new batteries immediately if it’s been a while you purchased them.
Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. … If the box turns ON or OFF, then install new batteries in the remote and try again.
