HDCP Error On Roku – Fix It In Seven Steps Guide

For subscribers currently experiencing Roku HDCP Error, read on to find out how to fix it.

This guide will cover all possible solutions you can utilize to fix this error. Before that, let’s explain what HDCP means.

HDCP detected or purple screen as it is referred to by some subscribers, often occurs as you want to open your device. HDCP is a form of protection standard being used by the TV and movie industry to stop duplicating their various content, especially commercial tapes.

In other words, it can be referred to as copy protection. Currently the newly introduced content protection in the market High bandwidth digital protection.

This can be seen in the majority of Roku devices, Blu-Ray players, and cable boxes. For those that watch 4K HDR on their devices, then you need HDCP 2.2 context protection technology.

Reasons why HDCP Error occurs on Roku

As already stated, the HDCP – High Bandwidth Digital Content Protection, is used in recent technologies, including televisions to prevent any error. Now let’s delve into some of the occurrences that cause the error to occur.

• One of the most frequent causes of this error which is carried out by a good number of subscribers is trying to stream content that is not compatible with HDCP. In other words, once the content you intend to stream is not supportive of the protection technology, there is every tendency the error will occur.

• Another common reason why you’ll experience this is as a result of faulty HDMI connectors or cables. Hence, it’s essential to always examine your HDMI cables even before any HDCP error might occur.

Steps to fix the HDCP Error

Below are some of the things you need to do in other to fix HDCP error and even prevent it from happening;

1. Whenever you want to stream especially 4K Ultra HD content and you’re confronted with a purple screen error message, carefully read the instructions on what you’re expected to do as you continue to set up your Roku player. If it continues to pop up, go over to step two, then continue.
2. Carefully detach the HDMI connection from your Roku player including the television.
3. Switch off your television, then disengage the power cord.
4. Next, remove the power wire directly connected to your Roku player.
5. Be patient for few minutes. Then proceed to reconnect The HDMI cable to the Roku player and television using the ends of the cable. As you do this, ensure that the cable heads are tight and not loose.
6. Next, re-join your television and Roku player directly to the power source. Be patient as the device gets turned on.
7. It’s time to start enjoying your favorite TV shows and movies again.

Another Technique to rectify ‘HDCP Error Detected’ Issue

This is an alternative you can use to rectify the HDCP error. Just carefully follow the guideline given below;

1. Change your HDMI cable from the initial port to another one.
2. Purchase another HDMI cable but the cable must be less than 6 feet. With this, you’re sure the cable won’t be defective.
3. For those using HDMI or AVR switch, connect it directly to the TV set.
4. The error may be from your television. Hence, if you’ve another set, try it there. It might be the solution you seek.
5. For those using a computer monitor, change it. You can try using your television.
6. It is also better to try other display settings on your Roku player. To find it, check beneath the settings, from there click on Display Type.
7. If you’re experiencing the HDCP error for the first time on your television screen especially after concluding the setup, then it’s important to check and be sure that your AVR supports HDCP. In other words, the television you’re currently using does not support HDCP, especially over any HDMI connection.

Conclusion

This is all you need to about the Roku HDCP error.

Therefore, whenever your Roku device begins to display a purple screen know that it’s likely to be an HDCP error.

In a situation, where the Roku player flags that the HDMI linked to the television does not match with the protection technology, the next you’ll see is the HDCP Error Detected sometimes with error code 020. At this point, follow the steps listed above to fix it.

Frequently asked questions

What is the first thing I should check to fix HDCP Error on Roku?

Most users tend to experience this error especially when a problem exists between the physical connection of your Roku player and that of your television.

This is a straightforward matter of taking the time to reconnect the HDMI cable. To do this, first, you need to unplug both ends then switch off the power from the Roku and TV device.

What is the consequence of an HDCP Error on the Roku player?

This error is implying that your television and your Roku device are disagreeing among themselves. This actually the best term that can be used to explain what goes on the point two HDMI devices are directly linked together. Most times, the data exchange between them won’t flow well.

How can I bypass the HDCP Error?

You need to procure an HDMI and HDCP Splitter;

1. Connect the purchased HDCP product directly to HDMI Splitter.
2. Connect the HDMI Splitter to DVR/TV Gaming System like the Hauppauge High Definition PVR 2 Gaming Edition.
3. Carefully reboot the device. Now you can watch and play content. All the HDCP errors will be gone!