Skip to content 
Table of Contents
Why is the insignia smart TV remote not working?
One thing the majority of smart TV owners struggle with is a remote malfunction. The causes may not be linked to just one factor, hence itโs important to consider all when finding a solution. Continue usage of old batteries and bad signals which affect the TV sensor are some likely suspects. On your part, make sure no object(s) is placed close to the TV sensor. Also, make it a habit to wipe the dust in front of the sensors.
How to fix insignia tv remote not working
Below are in detail some of the proven methods that can help you resolve this error.
Replace your remote batteries
This is the first method to try when faced with this problem. Batteries have a way of interfering a lot with signals from properly reaching your TV. Sometimes, it will be difficult for your TV to even recognize it. Though this might be a simple approach, it is very effective. As a rule of thumb, changing your remote batteries will help preserve it.
Power cycle the remote
If the batteries are not the problem, then try to power cycling the remote. Below is a step-by-step approach:
- Remove the batteries from the compartment.
- For about 3o seconds, press and hold the power button.
- Insert back the batteries.
- Confirm if itโs properly working by pressing each button.
Use a third-party remote
The issue might not be from your remote button, hence itโs advisable to try and use a universal insignia remote. You can follow the steps below to set up the universal remote:
- Switch on your insignia TV and the insignia universal remote you want to use.
- Tap on your insignia TV button thrice. A LED light will flash, thatโs an indication itโs ready to be programmed.
- Direct your remote to your TV, click for channel switches.
- Youโll notice the signal coming on or off. To stop press up or down to turn off the device.
- To save the code, tap the insignia TV button. The confirmation will be the blinking of the LED light.
- After this, you can now make use of your remote. This method can also be used for a new remote.
Contact Manufacturer
If you currently purchased your insignia TV, the warranty covers the accessories as well. This means that if you notice any problem, you can send it back to the manufacturer for repair or replacement. If none of the above worked, you can try these technical methods below.
3 Steps to fix insignia TV remote sensor
Donโt jump to conclusions yet if none of the methods worked. For instance, dirt blocking the sensor can cause the result to bad signal. Apply the methods below:
Power cycling insignia TV
This involves power cycling the entire TV. With this method, the TV software will run from boot up, hence repairing any power malfunction and outage interrupting the signal. Follow the steps below to perform a clean power cycle:
- Unplug your TV from the outlet.
- For at least one minute; hold firm, the power button.
- Release the power button, reconnect all the power buttons.
Note: In a situation where your Insignia TV is already plugged into a power strip, after the process, plug it directly to the outlet because it might be after the power strip. Switch on your Insignia TV and check if the problem has been solved.
Clean the sensor of your Insignia TV
You need to form the habit of cleaning the dirt that gathers around the sensor of your TV for at least one to two weeks to avoid any unwanted situations. If youโre currently experiencing this problem and youโve not cleaned the sensor, try and do so.
A clear line of sight
When there is an object between you and your insignia TV, it can cause signal interruption. It is advisable to ensure that any obstacle is removed. For instance, Fridge, wardrobes, etc should be avoided. In a situation where your TV is placed close to the ceiling, bring it down and watch if the signal will improve. Alternatively, you can disassemble your TV and relocate it. Purchasing another remote is the ultimate option when none of the methods worked for you.
In Conclusion
With the information made available on this write-up, you can tackle any issue preventing your Insignia remote from working. These will save you from a lot of frustration being reported by other users.
Frequently asked questions
What is preventing my Insignia TV remote from working?
In other to check if your remote control is at fault, detach your batteries from the remote, carefully check all the buttons before installing a new set of batteries. Most times, this solves the majority of the issues. But when the problem persists, your TV or remote might need repairs.
Can I reset my Insignia remote control?
Yes. Follow these simple steps below:
- Tap and hold the home button.
- Tap the Menu button thrice and release.
- Then press the Menu button repeatedly for nine times.
- Detach the batteries from your remote.
- Unplug everything and wait at least 60 seconds.
My TV remote suddenly stopped working. What could be the reason?
Several factors can cause this from happening. Most common among them are battery issues, physical damage, issues with pairing, infrared sensors, and much more.
