Are you havig problems with your remote for DirecTV not working then you need to read this quick and easy guide to fix it now.
The good news is, You’re not alone. We get many of the same questions in regard to the DirecTV remote failing to work as it should. If you feel the performance is lacklustre recently then there are a few ways to bump it back up to what is was.
In this post, we’ll cover some of the problems that can cause the DirecTV remote not to work, and we’ll offer some solutions for each problem.
DirecTV’s remote control can be used for a lot of functions, including controlling the programming guide, accessing the Favorite Channels list, full DVR functionality and playing and pausing the most recent episodes of the series.
So, when it’s not working entertainment is essentially cut off until you can fix the problem.
Table of Contents
How to fix when DirecTV remote is not working
OK, so you’re having a DirecTV remote not working issue? That’s unfortunate, but don’t panic because there are several potential fixes.
We’ll cover some of the most common causes of the remote not working and provide guidance on how to fix them.
Sometimes changing one little thing can make all the difference! So without further ado, here are some solutions on how to fix an unreliable DirecTV remote.
Check the state of the batteries
The first thing you should do if the DirecTV remote isn’t working is check whether the batteries are dead.
This can often be the problem, and dabbing a fresh set of batteries in the remote is a quick and easy fix.
If you find that your remote battery life is depleted then you’ll want to replace them as soon as possible.
The DirecTV universal remote has a battery status indicator.
You can use this to check the amount of battery life remaining in the remote.
Just press and hold the 1 button.
If you notice the green light on the remote flashing or blinking, it means the battery life is weakening.
No light, on the other hand, indicates dead batteries.
Whichever the case, get a new set of batteries and replace them when necessary.
Clean the remote control
Dust, grime, dirt, and other particles can affect the performance and can make the DirecTV remote slow to respond.
With a build-up around the keys the rubber keys are not making the proper contact with the PCB connection when you press a key.
What you should do is make sure that there are no flakes of dried-up dust, crumbs or grease anywhere around the buttons and other areas of the remote.
You may need to purchase a cleaning kit that includes brushes and a solution for remote controls.
A specialized cleaning fluid with soft microfiber will help remove any particles and dust from the remote’s touchpad.
Using a paper towel or soft cloth, lightly dampen the surface of the pad. Next, apply some cleaning fluid on top of the clean spot and work out any particles.
After drying off with a dry towel, use this same process again and repeat until there are no more problems.
Deeper Cleaning your Controller
We recommend a deeper cleaning of your controller if the initial cleaning didn’t make a difference to the controller’s performance. In this case, you will have to get a screwdriver to pen up your controller to remove the rubber keypads to do a further clean.
I short blast of compressed air or a slight shake can help dislodge any of the problem particles. Be sure to do a thorough clean of the remote control rubber pads in some warm soapy water and wait till it fully dries before putting your remote control together again.
Reset remote
If the remote isn’t responding then it might be a great idea to reset it.
Similar to any device, your controller can run into errors or glitches that cause it to not work properly.
For example, the channel commands may be corrupted when the DirecTV remote is first turned on, or perhaps the remote isn’t working at all.
In these cases, you’ll need to reset it in order to make sure that you clear up any glitches or errors.
Check the manual on how to do this, or consult a service provider to make sure that you’re doing it right.
Reset DirecTV receiver
Another thing to do is reset the receiver.
The DirecTV receiver is in charge of a lot of functions that include the television channels, the network feed, and the antenna.
There will be times when they suddenly stop working due to no reason at all.
In that case, if you run into problems with the remote control, try resetting the receiver and everything else.
This is because of a number of things that may have gone wrong with the receiver, including a malfunctioning antenna, a non-working wireless receiver, or possibly interferences such as RF interference.
Stuck buttons
The remote’s buttons can be stuck, which means they won’t respond or may not respond to the correct command.
You’ll need to use the force method by pressing down on them with your finger.
Oftentimes, one button is stuck in comparison to the others, so try pressing down on each one of them. You can also use a rubber or other non-abrasive object to help you push the buttons down.
Make sure you don’t press too hard or else it will cause excessive force and create damage.
Use the DirecTV app as an alternative
If your DirecTV remote isn’t working, then perhaps you’ll want to use the app instead.
The app can control several functions of your DirecTV system, including the channel guide and television programming.
If you’re watching a movie on DirecTV, the app can pause and resume the program, or pause it and record it.
You can also search for programs, movies or even channels using the app’s built-in search engine.
Final Thoughts
So, if you’re having problems with your DirecTV remote, try using the solutions for the most common issues.
Hopefully one of them will fix your problem, but if not then don’t fret.
There’s a good chance that there is simply no reason why the remote is not working at all.
So as long as you keep trying different methods, it’s bound to work eventually! If not, it’s time for a replacement.
FAQs
Is there a reset button on the DirecTV remote?
Yes, there is one. To reset, you’ll need to press and hold both the Mute and Select buttons.
How do I fix my remote not working?
Check whether the battery is dead and replace it.
You may also need to clean the remote control.
Use a cleaning kit and a special fluid for remotes.
