Skip to content 
If you are a proud owner of DirecTV, you probably have heard of Wireless Video Bridge. In this article, we will answer how to connect the DirecTV Wireless Video Bridge.
DirecTV is one of the top satellite TV providers in the United States. It offers a wide variety of channel packages and exclusive content on its streaming platform.
When it comes to entertainment services, people want convenience. They want to get rid of the hassle of flipping through channels and be able to watch what they want when they want.
DirecTV is offering just that, using their Wireless Video Bridge. Most of the users know about WVB but barely understand how it works to even how to connect it.
Luckily, you have landed on the right post for the details on the WVB and the right way to set it up.
Table of Contents
What is the DirecTV Wireless Video Bridge?
The DirecTV Wireless Video Bridge is a device that connects to your home network and your DirecTV satellite box. It then wirelessly sends the video signal from the satellite box to any TV in your home.
This is a great option if you have multiple TVs in your home and donโt want to run cables between the TVs and the satellite box.
The special thing about the Wireless Video Bridge is the fact that it enables the user to stream all of DirecTVโs programming from the Genie server to Genie Mini (C41W), including the Pay-Per-View events.
This happens wirelessly. The device creates a private network for the DirecTV products and allows easy video distribution in every part of your home. Itโs a great device because it eliminates the use of cumbersome coaxial cables.
What are the requirements of wireless video distribution?
There are a few requirements when you want to set up your Wireless Video Bridge.
The first one is the fact that your DirecTV satellite box must be configured to receive DIRECTV HD programming via an IP connection which can then be streamed wirelessly using the video bridge.
You will need to check with DirecTV before setting it up to see if your satellite box is IP-enabled.
The other requirement is that you have a home network with a broadband internet connection. The bridge will use your home network to send the video signal to all of your TVs.
The third requirement is that you have a C41W Genie Mini, which is the receiver that will display the DirecTV programming wirelessly.
The last thing is the Wireless Video Bridge, which is a small device that connects to your home network and then physically connects to your DirecTV satellite box via an HDMI cable.
Here is a shortlist of what you need to enjoy this feature fully;
- Wireless Video Bridge
- Genie Server
- External Power supply
- SWiM Installation
- A wireless Genie Mini Client (C41W).
How to connect DirecTV Wireless Video Bridge?
Upgrading equipment is never an easy task but is necessary for most people who want to stream their DirecTV satellite programming wirelessly.
The good news is that the process for setting up the Wireless Video Bridge is not difficult.
- The first thing you need to do is unplug your old receiver and box from power. You will also have to take out any cables that the equipment has plugged into it. After this, simply plug in your new receiver, this would be Genie Mini Client (C41W).
- Select a suitable location for the installation and placement of your WVB. The best location is typically closer to your C41Ws. It should also have easy access to the Coax SWiM network.
- Now you will have to connect the power to the WVB, using the included external power supply. After this is done, you can then connect the HDMI cable from the WVB to your satellite box. The WVB will take about 2 minutes to boot up.
- Setup the C41Ws in places around the home where they will be used.
- In the next step, you need to connect your Genie Mini Client (C41W) to your home network. This is done by plugging in the Ethernet cable from your Genie Mini Client to an open port on your home router. After this is done, you will be able to unplug the Ethernet cable from the back of your Genie Mini Client and place it anywhere in your home that has a clear view of the southern sky.
- Connect the wireless client (C41W) to your TV and power it on. Let it connect to the video bridge screen.
- Now, go to Menu on your C41W and select Settings. Scroll down to the Genie Server IP address and enter it in. After this, you will be able to scroll down and see a list of all the available channels. You are now ready to start streaming DirecTV programming wirelessly to any TV in your home!
Benefits of Wireless Video Bridge
There are many benefits to using the Wireless Video Bridge. The first one is that you can watch DirecTV programming in any room of your home without having to run cables all over the place.
This is great for people who have a lot of equipment or for those who want to hide their cables from view.
Another benefit is that you can watch DirecTV on a TV that doesnโt have a receiver. This is very convenient for people who have secondary TVs in the home which donโt have an attached receiver box.
The final advantage is that you can enjoy your programming anytime and anywhere with the Wireless Video Bridge since it works over a standard internet connection.
You can also share your account with friends and family members and they will be able to watch DirecTV programming on their TVs!
Conclusion
In conclusion, the Wireless Video Bridge is a great way to turn your DirecTV satellite TV system into a wireless streaming solution.
Itโs a fairly easy installation but does require some advanced networking knowledge to connect it to your home network.
FAQs
Why do I need a DirecTV wireless video bridge?
The DirecTV wireless video bridge is necessary to stream your DirecTV satellite programming wirelessly. Without it, you would have to run cables all over your home to get the programming to each TV.
What does connecting to video bridge mean?
When you connect to a video bridge, it means that your Genie Mini Client is connected to the Wireless Video Bridge. This allows you to stream DirecTV programming wirelessly to any TV in your home.
