DirecTV Storage Device Error – How to Fix (Guide)

Do you see a DirecTV storage device error message? If you’re getting this storage space warning, it simply means that the total space you’ve left is less than 10% on your DVR. Hence, you can confirm and check the recording space left on your DVR, by viewing the status bar found in your DVR Playlist.

Majority of DirecTV subscribers on the cheapest DirecTV package tend to allow their DVR to be filled with recordings, even those they don’t need. This, in turn, blocks the space from recording the shows you actually required. Directv DVR, especially the HR34 model, can even record up to 100 series.

You might think this is a lot of storage space, but it can be filled up quickly in a home where everybody wants to record their preferred shows. Before you know what’s happening, the spaces are already filled up. This implies no more new recordings pending when your manager’s spaces are entirely freed up.

Getting the best from your DVR means the series manager needs to be cleaned up often. You might not be aware, but when your DVR is trying to record all the shows you queued up, it tends to slow down all the system.

Hence, making sure the series manager is always clean with the required space will, to a large extent, help your DVR function optimally. Whenever a particular show gets be canceled on Directv, what is usually left is the reruns. Suppose you still left the order to record the canceled program.

In that case, your DVR will be automatically be filled up with previous episodes you’ve already watched in the time past because no new episodes are currently being produced. There is a reason to keep this; hence the best thing will be to cancel the order to free up spaces in your storage device.

If you’re currently facing this error message, it means you need to free up spaces from your manager so you can easily schedule and record upcoming seasons of your preferred shows.

How to fix Storage Device Error

Cleaning out your DirecTV DVR Series Manager

If you’re ready to free up some storage spaces in your DirecTV DVR, below are the steps you must follow. With this, your device will be only be filled with newly-recorded movies, series, and even shows. The good thing is that this will be just the program you’re currently watching. The step-by-step is as follow;

1. On your remote, press the “list” button.
2. Press “left,” followed by an arrow down to navigate to “Manage Recordings.”
3. Press “select” from the series manager.
4. From the drop-down, you’ll see all the series you’ve already scheduled to record. Now press the “R” button, not the red button, to delete any series link.
5. You’ll be shown with a prompt to confirm before it will be deleted. Remember to move the arrow down, then press “select.” This will ensure all the scheduled programs are canceled. Depending on how many shows/movies/events you want to delete, repeat this process as many times as possible. With this, you’ll have enough storage space in your DirecTV DVR.

Hooking up an External Hard Drive to a DirecTV DVR

There are specific recorded programming you might not want to delete; that’s when hooking up an external hard drive to your DVR will be needed. When this is added to your DirecTV, it will increase the storage capacity.

Hence you can now record more of your cherished TV events. However, you need to understand that not all DVR models can handle an external hard drive. To do this, you must be using HR20 DirecTV plus HD DVR or R22 Directv plus DVR. In case you do not know your model number, check the front door on your receiver to view it.

The steps to add the external are as follows;

1. First, disconnect your DVR from the power source. Locate the “SATA” port at the back of the device.
2. Connect your eSATA cable into this port; then, the other end should be plugged into your hard drive.
3. Connect the hard drive directly into the power supply before you turn it on.
4. Wait for a couple of seconds so the hard drive can start spinning. You can as well use a USB or another external power supply to power the hard drive.
5. Plug your DVR, press the power button so the booting process can start. When it restarts, the DVR will detect the new connected hard drive, which will now be used as a primary storage device.

In Conclusion

Now you’ve known what causes your DirecTV storage device error. As suggested in the write-up, you can free up spaces from your DVR to enable it to function optimally and has free spaces to save your new recording. Alternatively, you can as well add an external hard drive to add up to your storage capacity.

Frequently asked questions

Is it possible to save Directv DVR recordings inside a flash drive?

According to DirecTV, subscribers with the right equipment model can transfer and view any recorded movie, show, or event into a separate hard drive. This can be done through the eSATA connection, which can be seen at the back of your DVR. This is for compactible to an external hard drive.

How do I record with my DirecTV DVR?

You can make use of a capture device to copy shows. To do this, you need to plug your device into your computer before plugging the HDMI or any other component DVR cable. From here, you can then use the video capture device with the software to record any show. Alternatively, you can as well use another video capture software for it.

Is it possible to use my DVR with DirecTV?

DVR can record TV programming, cable, or even from an unlimited satellite provider, DirecTV inclusive. So, if you want to save money, you can actually purchase your DVR and connect it with DirecTV receiver.